Led Driver 60/220-240/24 Element 60w 12v 4062172277860
Osram
Part No
LEDECV6012
£13.82
£11.52
In stock
ELEMENT - Constant Voltage - Non dimmable
ELEMENT 60/220-240/12
Product family benefits:
High efficiency (up to 91 %)
Higher quality of light thanks to 0.95 at full load
Total Harmonic Distortion (THD) 0.95
ECG efficiency: 88 %
Device power loss: 8.2 W
Inrush current: < 20.1 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 23
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 12.5 V
U-OUT (working voltage): 12.125 V ~ 12.875 V
Nominal output power: 60 W
Galvanic isolation: SELV
Output ripple Voltage (100 Hz): < 3 %
Product weight: 308.00 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation length, input side: 5.0 mm
Length: 200 mm
Width: 40.0 mm
Height: 31.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 30000 h
Encapsulated: Yes
Dimmable: No
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I/II
Number of channels: 1
Intended for no-load operation: No
Approval marks – approval: BIS / CCC / CE / MM / RCM / UKCA
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 60598-1 / Acc. to EN 62384 / Acc. to CISPR 15 / Acc. to EN 61000-3-2/IEC 61000-3-2
Type of protection: IP20
Commodity code: 850440839000
ELEMENT 60/220-240/12
Product family benefits:
High efficiency (up to 91 %)
Higher quality of light thanks to 0.95 at full load
Total Harmonic Distortion (THD) 0.95
ECG efficiency: 88 %
Device power loss: 8.2 W
Inrush current: < 20.1 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 23
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 12.5 V
U-OUT (working voltage): 12.125 V ~ 12.875 V
Nominal output power: 60 W
Galvanic isolation: SELV
Output ripple Voltage (100 Hz): < 3 %
Product weight: 308.00 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation length, input side: 5.0 mm
Length: 200 mm
Width: 40.0 mm
Height: 31.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 30000 h
Encapsulated: Yes
Dimmable: No
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I/II
Number of channels: 1
Intended for no-load operation: No
Approval marks – approval: BIS / CCC / CE / MM / RCM / UKCA
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 60598-1 / Acc. to EN 62384 / Acc. to CISPR 15 / Acc. to EN 61000-3-2/IEC 61000-3-2
Type of protection: IP20
Commodity code: 850440839000
| Type of LED Driver | Constant Voltage |
|---|---|
| Type of Control/Dimming | Switched |
| Weight | 308g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify