Led Driver 60/220-240/24 Element 60w 12v 4062172277860
Osram
Part No
LEDECV6012
ELEMENT - Constant Voltage - Non dimmable
ELEMENT 60/220-240/12
Product family benefits:
High efficiency (up to 91 %)
Higher quality of light thanks to 0.95 at full load
Total Harmonic Distortion (THD) 0.95
ECG efficiency: 88 %
Device power loss: 8.2 W
Inrush current: < 20.1 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 23
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 12.5 V
U-OUT (working voltage): 12.125 V ~ 12.875 V
Nominal output power: 60 W
Galvanic isolation: SELV
Output ripple Voltage (100 Hz): < 3 %
Product weight: 308.00 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation length, input side: 5.0 mm
Length: 200 mm
Width: 40.0 mm
Height: 31.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 30000 h
Encapsulated: Yes
Dimmable: No
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I/II
Number of channels: 1
Intended for no-load operation: No
Approval marks – approval: BIS / CCC / CE / MM / RCM / UKCA
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 60598-1 / Acc. to EN 62384 / Acc. to CISPR 15 / Acc. to EN 61000-3-2/IEC 61000-3-2
Type of protection: IP20
Commodity code: 850440839000
ELEMENT 60/220-240/12
Product family benefits:
High efficiency (up to 91 %)
Higher quality of light thanks to 0.95 at full load
Total Harmonic Distortion (THD) 0.95
ECG efficiency: 88 %
Device power loss: 8.2 W
Inrush current: < 20.1 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 23
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 12.5 V
U-OUT (working voltage): 12.125 V ~ 12.875 V
Nominal output power: 60 W
Galvanic isolation: SELV
Output ripple Voltage (100 Hz): < 3 %
Product weight: 308.00 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation length, input side: 5.0 mm
Length: 200 mm
Width: 40.0 mm
Height: 31.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 30000 h
Encapsulated: Yes
Dimmable: No
Short-circuit protection: Yes
Suitable for fixtures with prot. class: I/II
Number of channels: 1
Intended for no-load operation: No
Approval marks – approval: BIS / CCC / CE / MM / RCM / UKCA
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 60598-1 / Acc. to EN 62384 / Acc. to CISPR 15 / Acc. to EN 61000-3-2/IEC 61000-3-2
Type of protection: IP20
Commodity code: 850440839000
| Type of LED Driver | Constant Voltage |
|---|---|
| Type of Control/Dimming | Switched |
| Weight | 308g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify